Kenwood, CA— fire, flood & earthquake hazard information
Kenwood is a unincorporated community in Sonoma County in the San Francisco Bay Area, covering about 5.2 square miles. This page summarizes what official government maps show for Kenwood: CAL FIRE fire hazard severity zones, FEMA flood zones, state seismic hazard zones, dam inundation areas, airport noise contours, and air-quality indicators. Figures are the share of Kenwood’s area that falls inside each mapped zone.
View Kenwood on the interactive map → to check any specific address, free.
Wildfire hazard severity zones
Per CAL FIRE's Fire Hazard Severity Zone maps, 19% of Kenwood is in a Very High fire hazard severity zone, 24% is in a High zone, 17% is in a Moderate zone. The remainder of its area is outside currently designated zones.
| Very High severity zone | 19% |
| High severity zone | 24% |
| Moderate severity zone | 17% |
FEMA flood zones
3% of Kenwood lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); 2% is in the 0.2% annual chance (500-year) area. Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.
| Special Flood Hazard Area (100-yr) | 3% |
| 0.2% annual chance (500-yr) | 2% |
Earthquake faults & seismic zones
The nearest mapped fault, the Unnamed fault in California, is about 1.1 mi (1.8 km) from the center of Kenwood. 1 named fault trace in the USGS Quaternary fault database cross its boundary.
| Nearest mapped fault | Unnamed fault in California — 1.1 mi (1.8 km) |
| Named fault traces crossing boundary | 1 |
Dam inundation, aircraft noise & air quality
annual average fine-particle (PM2.5) concentration across its census tracts is 7.4 μg/m³, and its composite pollution burden ranks around the 20th percentile statewide.
| Annual PM2.5 (tract average) | 7.4 μg/m³ |
| Pollution burden percentile (statewide) | ~20 |
Frequently asked questions
- Is Kenwood in a wildfire hazard severity zone?
- Per CAL FIRE's Fire Hazard Severity Zone maps, 19% of Kenwood is in a Very High fire hazard severity zone, 24% is in a High zone, 17% is in a Moderate zone. The remainder of its area is outside currently designated zones.
- Is Kenwood in a FEMA flood zone?
- 3% of Kenwood lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); 2% is in the 0.2% annual chance (500-year) area. Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.
- What earthquake faults and seismic zones affect Kenwood?
- The nearest mapped fault, the Unnamed fault in California, is about 1.1 mi (1.8 km) from the center of Kenwood. 1 named fault trace in the USGS Quaternary fault database cross its boundary.
- How do I check a specific address in Kenwood?
- Use the free sitelume interactive map at https://sitelume.com — search any Kenwood address to see which mapped zones it falls in, layer by layer.
Nearby in Sonoma County
Sources: CAL FIRE Fire Hazard Severity Zones; FEMA National Flood Hazard Layer; USGS Quaternary Faults; CGS Seismic Hazard Zones & Alquist-Priolo zones; Cal OES dam inundation maps; county ALUC noise contours; CalEnviroScreen 4.0. Area shares are computed against each place’s Census TIGER boundary (last computed 2026-07-24). Boundaries and zone designations change; always verify with the issuing agency.