Salmon Creek, CA— fire, flood & earthquake hazard information
Salmon Creek is a unincorporated community in Sonoma County in the San Francisco Bay Area, covering about 1.1 square miles. This page summarizes what official government maps show for Salmon Creek: CAL FIRE fire hazard severity zones, FEMA flood zones, state seismic hazard zones, dam inundation areas, airport noise contours, and air-quality indicators. Figures are the share of Salmon Creek’s area that falls inside each mapped zone.
View Salmon Creek on the interactive map → to check any specific address, free.
Wildfire hazard severity zones
Per CAL FIRE's Fire Hazard Severity Zone maps, 99% is in a Moderate zone. The remainder of its area is outside currently designated zones.
| Moderate severity zone | 99% |
FEMA flood zones
5% of Salmon Creek lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); 7% is in a coastal high hazard zone (V/VE). Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.
| Special Flood Hazard Area (100-yr) | 5% |
| Coastal high hazard (V/VE) | 7% |
Earthquake faults & seismic zones
The San Andreas fault zone crosses Salmon Creek. 1 named fault trace in the USGS Quaternary fault database cross its boundary. 45% falls within an Alquist-Priolo earthquake fault zone, where new construction requires a fault study.
| Nearest mapped fault | San Andreas fault zone — 0.0 mi (0.0 km) |
| Named fault traces crossing boundary | 1 |
| Alquist-Priolo fault zone | 45% |
Dam inundation, aircraft noise & air quality
annual average fine-particle (PM2.5) concentration across its census tracts is 5.7 μg/m³, and its composite pollution burden ranks around the 28th percentile statewide.
| Annual PM2.5 (tract average) | 5.7 μg/m³ |
| Pollution burden percentile (statewide) | ~28 |
Frequently asked questions
- Is Salmon Creek in a wildfire hazard severity zone?
- Per CAL FIRE's Fire Hazard Severity Zone maps, 99% is in a Moderate zone. The remainder of its area is outside currently designated zones.
- Is Salmon Creek in a FEMA flood zone?
- 5% of Salmon Creek lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); 7% is in a coastal high hazard zone (V/VE). Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.
- What earthquake faults and seismic zones affect Salmon Creek?
- The San Andreas fault zone crosses Salmon Creek. 1 named fault trace in the USGS Quaternary fault database cross its boundary. 45% falls within an Alquist-Priolo earthquake fault zone, where new construction requires a fault study.
- How do I check a specific address in Salmon Creek?
- Use the free sitelume interactive map at https://sitelume.com — search any Salmon Creek address to see which mapped zones it falls in, layer by layer.
Nearby in Sonoma County
Sources: CAL FIRE Fire Hazard Severity Zones; FEMA National Flood Hazard Layer; USGS Quaternary Faults; CGS Seismic Hazard Zones & Alquist-Priolo zones; Cal OES dam inundation maps; county ALUC noise contours; CalEnviroScreen 4.0. Area shares are computed against each place’s Census TIGER boundary (last computed 2026-07-24). Boundaries and zone designations change; always verify with the issuing agency.