sitelume · area guidesOpen the interactive map →

Alameda County— fire, flood & earthquake hazard information

Alameda County is a county in the San Francisco Bay Area, covering about 737.5 square miles. This page summarizes what official government maps show for Alameda County: CAL FIRE fire hazard severity zones, FEMA flood zones, state seismic hazard zones, dam inundation areas, airport noise contours, and air-quality indicators. Figures are the share of Alameda County’s area that falls inside each mapped zone.

View Alameda County on the interactive map → to check any specific address, free.

Wildfire hazard severity zones

Per CAL FIRE's Fire Hazard Severity Zone maps, 7% of Alameda County is in a Very High fire hazard severity zone, 29% is in a High zone, 14% is in a Moderate zone. The remainder of its area is outside currently designated zones.

Very High severity zone7%
High severity zone29%
Moderate severity zone14%

FEMA flood zones

8% of Alameda County lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); 2% is in a coastal high hazard zone (V/VE); 3% is in the 0.2% annual chance (500-year) area. Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.

Special Flood Hazard Area (100-yr)8%
Coastal high hazard (V/VE)2%
0.2% annual chance (500-yr)3%

Earthquake faults & seismic zones

The nearest mapped fault, the Calaveras fault zone, is about 1.0 mi (1.6 km) from the center of Alameda County. 20 named fault traces in the USGS Quaternary fault database cross its boundary. 23% of its area is in a state-designated liquefaction zone of required investigation. 12% is in an earthquake-induced landslide zone. 3% falls within an Alquist-Priolo earthquake fault zone, where new construction requires a fault study.

Nearest mapped faultCalaveras fault zone — 1.0 mi (1.6 km)
Named fault traces crossing boundary20
Liquefaction zone23%
Earthquake-induced landslide zone12%
Alquist-Priolo fault zone3%

Dam inundation, aircraft noise & air quality

14% of Alameda County lies within a state-reviewed dam-failure inundation area; less than 1% is inside an airport noise contour of 65 dB CNEL or louder; annual average fine-particle (PM2.5) concentration across its census tracts is 8.3 μg/m³, and its composite pollution burden ranks around the 52th percentile statewide.

Dam-failure inundation area14%
Airport noise ≥65 dB CNELless than 1%
Annual PM2.5 (tract average)8.3 μg/m³
Pollution burden percentile (statewide)~52

Frequently asked questions

Is Alameda County in a wildfire hazard severity zone?
Per CAL FIRE's Fire Hazard Severity Zone maps, 7% of Alameda County is in a Very High fire hazard severity zone, 29% is in a High zone, 14% is in a Moderate zone. The remainder of its area is outside currently designated zones.
Is Alameda County in a FEMA flood zone?
8% of Alameda County lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); 2% is in a coastal high hazard zone (V/VE); 3% is in the 0.2% annual chance (500-year) area. Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.
What earthquake faults and seismic zones affect Alameda County?
The nearest mapped fault, the Calaveras fault zone, is about 1.0 mi (1.6 km) from the center of Alameda County. 20 named fault traces in the USGS Quaternary fault database cross its boundary. 23% of its area is in a state-designated liquefaction zone of required investigation. 12% is in an earthquake-induced landslide zone. 3% falls within an Alquist-Priolo earthquake fault zone, where new construction requires a fault study.
How do I check a specific address in Alameda County?
Use the free sitelume interactive map at https://sitelume.com — search any Alameda County address to see which mapped zones it falls in, layer by layer.

Cities in Alameda County

Sources: CAL FIRE Fire Hazard Severity Zones; FEMA National Flood Hazard Layer; USGS Quaternary Faults; CGS Seismic Hazard Zones & Alquist-Priolo zones; Cal OES dam inundation maps; county ALUC noise contours; CalEnviroScreen 4.0. Area shares are computed against each place’s Census TIGER boundary (last computed 2026-07-24). Boundaries and zone designations change; always verify with the issuing agency.