Livermore, CA— fire, flood & earthquake hazard information
Livermore is a city in Alameda County in the San Francisco Bay Area, covering about 26.6 square miles. This page summarizes what official government maps show for Livermore: CAL FIRE fire hazard severity zones, FEMA flood zones, state seismic hazard zones, dam inundation areas, airport noise contours, and air-quality indicators. Figures are the share of Livermore’s area that falls inside each mapped zone.
View Livermore on the interactive map → to check any specific address, free.
Wildfire hazard severity zones
Per CAL FIRE's Fire Hazard Severity Zone maps, less than 1% is in a High zone, 3% is in a Moderate zone. The remainder of its area is outside currently designated zones.
| High severity zone | less than 1% |
| Moderate severity zone | 3% |
FEMA flood zones
5% of Livermore lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); 7% is in the 0.2% annual chance (500-year) area. Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.
| Special Flood Hazard Area (100-yr) | 5% |
| 0.2% annual chance (500-yr) | 7% |
Earthquake faults & seismic zones
The nearest mapped fault, the Livermore fault, is about 1.5 mi (2.5 km) from the center of Livermore. 5 named fault traces in the USGS Quaternary fault database cross its boundary. 48% of its area is in a state-designated liquefaction zone of required investigation. 1% is in an earthquake-induced landslide zone. 3% falls within an Alquist-Priolo earthquake fault zone, where new construction requires a fault study.
| Nearest mapped fault | Livermore fault — 1.5 mi (2.5 km) |
| Named fault traces crossing boundary | 5 |
| Liquefaction zone | 48% |
| Earthquake-induced landslide zone | 1% |
| Alquist-Priolo fault zone | 3% |
Dam inundation, aircraft noise & air quality
5% of Livermore lies within a state-reviewed dam-failure inundation area; 3% is inside an airport noise contour of 65 dB CNEL or louder; annual average fine-particle (PM2.5) concentration across its census tracts is 8.3 μg/m³, and its composite pollution burden ranks around the 50th percentile statewide.
| Dam-failure inundation area | 5% |
| Airport noise ≥65 dB CNEL | 3% |
| Annual PM2.5 (tract average) | 8.3 μg/m³ |
| Pollution burden percentile (statewide) | ~50 |
Frequently asked questions
- Is Livermore in a wildfire hazard severity zone?
- Per CAL FIRE's Fire Hazard Severity Zone maps, less than 1% is in a High zone, 3% is in a Moderate zone. The remainder of its area is outside currently designated zones.
- Is Livermore in a FEMA flood zone?
- 5% of Livermore lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); 7% is in the 0.2% annual chance (500-year) area. Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.
- What earthquake faults and seismic zones affect Livermore?
- The nearest mapped fault, the Livermore fault, is about 1.5 mi (2.5 km) from the center of Livermore. 5 named fault traces in the USGS Quaternary fault database cross its boundary. 48% of its area is in a state-designated liquefaction zone of required investigation. 1% is in an earthquake-induced landslide zone. 3% falls within an Alquist-Priolo earthquake fault zone, where new construction requires a fault study.
- How do I check a specific address in Livermore?
- Use the free sitelume interactive map at https://sitelume.com — search any Livermore address to see which mapped zones it falls in, layer by layer.
Nearby in Alameda County
Sources: CAL FIRE Fire Hazard Severity Zones; FEMA National Flood Hazard Layer; USGS Quaternary Faults; CGS Seismic Hazard Zones & Alquist-Priolo zones; Cal OES dam inundation maps; county ALUC noise contours; CalEnviroScreen 4.0. Area shares are computed against each place’s Census TIGER boundary (last computed 2026-07-24). Boundaries and zone designations change; always verify with the issuing agency.