Union City, CA— fire, flood & earthquake hazard information
Union City is a city in Alameda County in the San Francisco Bay Area, covering about 19.4 square miles. This page summarizes what official government maps show for Union City: CAL FIRE fire hazard severity zones, FEMA flood zones, state seismic hazard zones, dam inundation areas, airport noise contours, and air-quality indicators. Figures are the share of Union City’s area that falls inside each mapped zone.
View Union City on the interactive map → to check any specific address, free.
Wildfire hazard severity zones
Per CAL FIRE's Fire Hazard Severity Zone maps, less than 1% of Union City is in a Very High fire hazard severity zone. The remainder of its area is outside currently designated zones.
| Very High severity zone | less than 1% |
FEMA flood zones
9% of Union City lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); less than 1% is in the 0.2% annual chance (500-year) area. Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.
| Special Flood Hazard Area (100-yr) | 9% |
| 0.2% annual chance (500-yr) | less than 1% |
Earthquake faults & seismic zones
The nearest mapped fault, the Hayward fault zone, is about 1.3 mi (2.1 km) from the center of Union City. 3 named fault traces in the USGS Quaternary fault database cross its boundary. 35% of its area is in a state-designated liquefaction zone of required investigation. 28% is in an earthquake-induced landslide zone. 3% falls within an Alquist-Priolo earthquake fault zone, where new construction requires a fault study.
| Nearest mapped fault | Hayward fault zone — 1.3 mi (2.1 km) |
| Named fault traces crossing boundary | 3 |
| Liquefaction zone | 35% |
| Earthquake-induced landslide zone | 28% |
| Alquist-Priolo fault zone | 3% |
Dam inundation, aircraft noise & air quality
30% of Union City lies within a state-reviewed dam-failure inundation area; annual average fine-particle (PM2.5) concentration across its census tracts is 8.4 μg/m³, and its composite pollution burden ranks around the 23th percentile statewide.
| Dam-failure inundation area | 30% |
| Annual PM2.5 (tract average) | 8.4 μg/m³ |
| Pollution burden percentile (statewide) | ~23 |
Frequently asked questions
- Is Union City in a wildfire hazard severity zone?
- Per CAL FIRE's Fire Hazard Severity Zone maps, less than 1% of Union City is in a Very High fire hazard severity zone. The remainder of its area is outside currently designated zones.
- Is Union City in a FEMA flood zone?
- 9% of Union City lies within a FEMA Special Flood Hazard Area (1% annual chance, zones A/AE/AH/AO); less than 1% is in the 0.2% annual chance (500-year) area. Federally backed mortgages in a Special Flood Hazard Area generally require flood insurance.
- What earthquake faults and seismic zones affect Union City?
- The nearest mapped fault, the Hayward fault zone, is about 1.3 mi (2.1 km) from the center of Union City. 3 named fault traces in the USGS Quaternary fault database cross its boundary. 35% of its area is in a state-designated liquefaction zone of required investigation. 28% is in an earthquake-induced landslide zone. 3% falls within an Alquist-Priolo earthquake fault zone, where new construction requires a fault study.
- How do I check a specific address in Union City?
- Use the free sitelume interactive map at https://sitelume.com — search any Union City address to see which mapped zones it falls in, layer by layer.
Nearby in Alameda County
Sources: CAL FIRE Fire Hazard Severity Zones; FEMA National Flood Hazard Layer; USGS Quaternary Faults; CGS Seismic Hazard Zones & Alquist-Priolo zones; Cal OES dam inundation maps; county ALUC noise contours; CalEnviroScreen 4.0. Area shares are computed against each place’s Census TIGER boundary (last computed 2026-07-24). Boundaries and zone designations change; always verify with the issuing agency.